Turning Center
MONO 400
The MONO 400 is a heavy-duty CNC turning machine designed for high-capacity machining with greater spindle power and rigidity.
Turning Center
Mono 400
| SWING OVER CARRIAGE | 500 MM |
|---|---|
| MAX. TURNING DIA | 500 MM |
| MAX. TURNING LENGTH | 525 MM |
| TRAVEL (X / Z) | 260 / 525 MM |
| RAPID FEED (X / Z) | 24 M/MIN |
| CHUCK SIZE | 380x3 MM |
| SPINDLE POWER (FANUC) | 15 / 18.5 (P) KW |
| SPINDLE BORE | 110 MM |
| SPINDLE NOSE | A2 - 11 |
| WEIGHT (APPROX) | 5500 KG |
Turning Center
Mono 400
The slide system provides 260 mm of cross travel on the X-axis and 525 mm of longitudinal travel on the Z-axis. Rapid feed rates on both the X and Z axes are 24 m/min, helping achieve quick positioning and efficient machining cycles.
The main spindle is equipped with an A2-11 spindle nose and a Ø110 mm spindle bore, with a maximum bar capacity of Ø86 mm. It supports a Ø380 mm three-jaw chuck and operates within a spindle speed range of 50 to 2000 rpm. The full power range is available from 375 to 1500 rpm. The spindle motor is rated at 15 kW for continuous operation and 18.5 kW for a 15-minute rating. According to the power diagram, maximum acceleration power reaches approximately 20.4 kW, with peak power around 18.5 kW and continuous power of about 15 kW.
The MONO 400 is fitted with an 8-station turret that accommodates 25 × 25 mm tools and boring bars up to Ø40 mm. The tailstock is equipped with an MT4 quill taper, a Ø80 mm quill diameter, and a quill stroke of 100 mm. The machine provides a positioning accuracy of 0.008 mm and repeatability of 0.007 mm, supporting consistent and precise machining performance.